产品介绍

JetCon 1301
  • Slim-sized Fast Ethernet to Fiber Media Converter

    JetCon 1301 Slim-sized Fast Ethernet to Fiber Media Converter
    技术参数


    Korenix JetNet 5212GP-2C2F Industrial 8G RJ45 + 2G Combo + 2G SFP Managed PoE Switch
    停产通知   
     


     


JetCon 1301 Slim-sized Fast Ethernet to Fiber Media Converter

  • One 10/100 TX port to One 100FX port media converter

  • Dual Forwarding modes- Switching and Pure converter

  • Supports Auto MDI/MDI-X, Auto Negotiation

  • Supports Multi-mode 2KM, Single-mode 30KM

  • Auto Link Loss Forwarding for fault detection

  • Extreme Low Data Forwarding Latency- 1.6 x 10-6 Sec

  • Wide range of AC18-27V/DC18-32V and DC36-60 (JetCon 1301-48V) power inputs with DC polarity protection

  • Aluminum case with IP31 grade protection

  • Supports 1.5KV Hi-PoT isolation protection

  • Supports single fiber transmission – WDM

  • Operating temperature -10~70°C (-40~80°C wide operating temperature model available by request)

JetCon 1301 Slim-sized Fast Ethernet to Fiber Media Converter
文件名称 描述 发布日期 文件大小 下载
Datasheet DS_JetCon1301_V1.1 2019/08/23 388.46KB
Quick Installation Guide QIG_JetCon1301_V1.2 2019/08/23 9.84MB
Quick Installation Guide QIG_JetCon1301_V1.4 2019/08/23 4.1MB
CE CE_JetCon1301 2019/08/23 410.91KB
FCC FCC_JetCon1301 2019/08/23 398.36KB
Vibration Test Vibration-Test_JetCon1301 2019/08/23 360.04KB
文件名称 描述 发布日期 文件大小 下载
暂无数据

产品介绍

JetCon 1301 is a compact 1-port Fast Ethernet media converter designed as small as a cigarette box, making it an ideal model that would physically fit into a chassis with limited space, such as machinery control box and duct assembly room. It also supports switch forwarding mode with abnormal packet filtering and pure converter mode for extreme low latency requirement – fieldbus and EtherCAT, which needs invariant forwarding latency in 64~1522 bytes packet length. For easy maintenance and time-saving, JetCon 1301 features remote Link Loss Forwarding technology which provides remote link down signal forwarding, acknowledging link events occurred on each end of JetCon 1301. To activate forwarding mode and LLF functions, simply adjust DIP switch and reset the converter and the reconfiguration will be applied.

备注